Publikationen

B. Boes, J. W. Simon and H. Holthusen, "A constitutive model for describing decoupled material behavior in thickness and in-plane directions", PAMM, vol. n/a, no. n/a, pp. e202300057, 2023.

DOI: https://doi.org/10.1002/pamm.202300057

L. Poggenpohl, H. Holthusen and J. W. Simon, "Averaging techniques for microstructures with localization bands due to damage progression", PAMM, vol. 22, no. 1, pp. e202200307, 2023.

DOI: https://doi.org/10.1002/pamm.202200307

G. Kloppenburg, X. Li, A. Dinkelmann, H. Finckh, J. Neumann and J. W. Simon, "Identifying microstructural properties of paper", PAMM, vol. n/a, no. n/a, pp. e202300251, 2023.

DOI: https://doi.org/10.1002/pamm.202300251

D. Macek, H. Holthusen, A. Rjosk, S. Ritzert, T. Lautenschläger, C. Neinhuis, J. W. Simon and S. Reese, "Mechanical investigations of the peltate leaf of Stephania japonica (Menispermaceae): Experiments and a continuum mechanical material model", Frontiers in Plant Science, vol. 13, 2023.

DOI: 10.3389/fpls.2022.994320

N. Kopic-Osmanovic, E. Prume, S. Felder, G. Kloppenburg and J. W. Simon, "Modeling the anisotropic elasto-plastic material behavior of paper and paperboard at finite deformations", PAMM, vol. 22, no. 1, pp. e202200293, 2023.

DOI: https://doi.org/10.1002/pamm.202200293

S. Ritzert, D. Macek, J. W. Simon and S. Reese, "Reduced order modeling of modular parameter dependent structures based on proper orthogonal decomposition and mesh tying", PAMM, vol. 22, no. 1, pp. e202200189, 2023.

DOI: https://doi.org/10.1002/pamm.202200189

G. Kloppenburg, E. Walther, H. Holthusen, C. Czibula, U. Hirn and J. W. Simon, "Using numerical homogenization to determine the representative volume element size of paper", PAMM, vol. 22, no. 1, pp. e202200226, 2023.

DOI: https://doi.org/10.1002/pamm.202200226

B. Boes, J. W. Simon, S. Reese and H. Holthusen, "A novel continuum mechanical framework for decoupled material behavior in thickness and in-plane directions", Computer Methods in Applied Mechanics and Engineering, vol. 415, pp. 116192, 2023.

DOI: https://doi.org/10.1016/j.cma.2023.116192

S. Adhikari, C. J. Durning, J. Fish, J. W. Simon and S. K. Kumar, "Modeling Thermal Welding of Semicrystalline Polymers", Macromolecules, vol. 55, no. 5, pp. 1719-1725, 2022.

DOI: 10.1021/acs.macromol.1c02612

D. Macek, J. W. Simon and S. Reese, "Reduced Order Modeling for modular anisotropic Structures based on Proper Orthogonal Decomposition and Mesh Tying" in Proceedings of the 15th World Congress on Computational Mechanics (WCCM-XV) and 8th Asian Pacific Congress on Computational Mechanics, 2022, pp. 1-12.

DOI: 10.23967/wccm-apcom.2022.097

L. Zhou, J. W. Simon and S. Reese, "Modellreduktion und Substrukturtechnik am Beispiel von modularen Schalentragwerken aus ultrahochfestem Beton" in SPP 1542: Leicht Bauen mit Beton: Grundlagen für das Bauen der Zukunft mit bionischen und mathematischen Entwurfsprinzipien: Abschlussbericht, Prof. Dr.-Ing. Dr.-Ing. E.h. Manfred Curbach, Eds. Dresden: Technische Universität Dresden, 2022, pp. 590-609.

DOI: 10.25368/2022.344

L. Poggenpohl, H. Holthusen and J. W. Simon, "Failure zone homogenization for modeling damage- and debonding-induced softening in composites including gradient-extended damage at finite strains", International Journal of Plasticity, vol. 154, pp. 103277, 2022.

DOI: 10.1016/j.ijplas.2022.103277

L. Poggenpohl, H. Holthusen and J. W. Simon, "Failure zone homogenization at mode II and mixed mode loading including gradient-extended damage and interface debonding at finite strains", Composite Structures, vol. 298, pp. 115997, 2022.

DOI: 10.1016/j.compstruct.2022.115997

Z. Zhao, C. Liu, H. Wang, J. W. Simon, J. Wang and Y. Li, "Crushing behavior of curved Nomex honeycombs under combined shear-compression loads", International Journal of Mechanical Sciences, vol. 228, pp. 107480, 2022.

DOI: 10.1016/j.ijmecsci.2022.107480

J. W. Simon, "Computational lower bound shakedown analysis with limited kinematic hardening is only safe if a specific hardening law is defined", Mechanics Research Communications, vol. 121, pp. 103865, 2022.

DOI: 10.1016/j.mechrescom.2022.103865

H. Holthusen, T. Brepols, S. Reese and J. W. Simon, "A two-surface gradient-extended anisotropic damage model using a second order damage tensor coupled to additive plasticity in the logarithmic strain space", Journal of the Mechanics and Physics of Solids, vol. 163, pp. 104833, 2022.

DOI: 10.1016/j.jmps.2022.104833

H. Holthusen, T. Brepols, J. W. Simon and S. Reese, "A gradient-extended anisotropic damage-plasticity model in the logarithmic strain space" in Proceedings of the 8th European Congress on Computational Methods in Applied Sciences and Engineering, 2022.

DOI: 10.23967/eccomas.2022.009

H. Holthusen, T. Brepols, S. Reese and J. W. Simon, "A novel gradient-extended anisotropic two-surface damage-plasticity model for finite deformations" in Proceedings of the 16th International Conference on Computational Plasticity, COMPLAS 2021, 2021, pp. 1-12.

DOI: 10.23967/complas.2021.035

J. W. Simon, "A Review of Recent Trends and Challenges in Computational Modeling of Paper and Paperboard at Different Scales", Archives of Computational Methods in Engineering, vol. 28, no. 4, pp. 2409-2428, 2021.

DOI: 10.1007/s11831-020-09460-y

L. Poggenpohl and J. W. Simon, "Averaging techniques for microstructures with localization bands due to damage progression" in Proceedings of the 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2021, 2021.

DOI: 10.23967/composites.2021.051

B. Schaaf, B. Abeln, C. Richter, M. Feldmann, E. Toups, J. W. Simon, S. Reese, R. V. Seewald, A. Schiebahn and U. Reisgen, "Bestimmung von Material- und Modellparametern hyperelastischer Silikonklebungen im konstruktiven Glasbau", Bauingenieur, vol. 96, no. 1/2, pp. 37-46, 2021.

DOI: 10.37544/0005-6650-2021-01-02-63

B. Schaaf, C. Richter, M. Feldmann, E. Toups, J. W. Simon, S. Reese, R. V. Seewald, A. Schiebahn and U. Reisgen, "Numerische Simulation hyperelastischer Klebverbindungen unter Berücksichtigung eines neuartigen Materialmodells" in Glasbau: Bauten und Projekte, Bemessung und Konstruktion, Forschung und Entwicklung, Bauprodukte und Bauarten / Bundesverband Flachglas, Technische Universität Dresden, Institut für Baukonstruktion, Eds. Berlin: Ernst & Sohn, 2021, pp. 231-242.

Download

R. Bedzra, S. Reese and J. W. Simon, "Hierarchical multi-scale modelling of flax fibre/epoxy composite by means of general anisotropic viscoelastic-viscoplastic constitutive models: Part II - Mesomechanical model", International Journal of Solids and Structures, vol. 202, pp. 299-318, 2020.

DOI: 10.1016/j.ijsolstr.2020.05.019

G. Kloppenburg, H. Holthusen, Y. Li, J. Bloch, U. Hirn and J. W. Simon, "Numerical investigation of paper using the concept of representative volume elements characterized by single fiber behavior and fiber-fiber interaction" in Proceedings of the Progress in Paper Physics Seminar PPPS2020: book of abstracts, 2020, pp. 211-214.

DOI: 10.32040/2242-122X.2020.T378

S. Felder, N. A. Vu, S. Reese and J. W. Simon, "Modeling the effect of temperature and degree of crystallinity on the mechanical response of Polyamide 6", Mechanics of Materials, vol. 148, pp. 103476, 2020.

DOI: 10.1016/j.mechmat.2020.103476